Get the latest price? We will reply as soon as possible (within 12 hours)

How many kinds of machines for breaking stone, stone crusher, sand making machine?

2024-06-01

How many kinds of machines for breaking stone, stone crusher, sand making machine?

Cone crusher is a common crushing equipment. Its working principle is that the motor through the pulley

 and belt drive equipment drive shaft rotation, drive shaft through the large and small bevel gears drive 

eccentric sleeve rotation, the dynamic cone through the main shaft in the role of the eccentric sleeve to

 do the rotary oscillation movement, so that the dynamic cone and the fixed cone sometimes close to, 

and sometimes away from the rolling mortar wall, the material in the rolling mortar wall and the crusher 

between the crushing chamber is constantly subjected to extrusion, impact and crushing, crushed 

materials from the lower part of the discharge.

Jaw crusher is a common crushing equipment, which is mainly composed of two jaw plates, adjusting 

device, motor and so on. Its working principle is that the motor drives the belt and pulley, and through

 the eccentric shaft, the movable jaw swings up and down, when the movable jaw pushes the movable

 jaw plate to the fixed jaw plate, the material is crushed or split. When the movable jaw and the movable

 jaw plate move back under the action of eccentric shaft and spring, the material which has been 

crushed or split before will be discharged from the lower discharge port of the jaw plate.

jaw crusher

Jaw crusher is a common crushing equipment, its working principle is the rotor under the drive of the

 motor rotating at high speed, from the inlet into the material and the rotor plate hammer impact, by 

the high-speed impact of the plate hammer is crushed; crushed material is counter-attacked to the

 liner plate again crushed; and then discharged from the discharge port. Adjusting the gap between

 the counterattack frame and rotor frame can achieve the purpose of changing the granularity and 

shape of the material.

Impact sand making machine is a common sand making equipment, its working principle is that the

 material enters the high-speed rotor through the center feed hole and is fully accelerated and thrown

 out through the launching port, firstly, it collides with a part of the material falling freely after 

rebounding, and then it impacts on the vortex material lining in the surrounding vortex cavity (or on 

the counterattacking block) together, and firstly, it is rebounded to the top of the crushing cavity, and

 then it is deflected to the downward movement, and then it collides with the material launching out

 from the impeller channel to form a continuous material curtain, and then it is discharged through the 

lower discharge port. It is first rebounded to the top of the crushing chamber, then deflected

 downward, and impacted with the materials launched from the impeller channel to form a continuous 

material curtain, and then discharged through the lower discharge port. 

There are many types of stone crusher and sand making machine, and each type has a different 

working principle and scope of application. When using these equipments, we need to choose the right

 one according to the actual situation in order to better complete the crushing and sand making work.

cone crusher